ROC PRIME ( White cement) Tile Adhesive

Additional information*

ROCBOND Tile Adhesive ROC PRIME - White Cement

Introducing the ROCBOND ROC PRIME Tile Adhesive, a premium polymer-modified tile adhesive formulated to deliver exceptional performance for a broad spectrum of interior and exterior tiling applications. Engineered to meet the stringent standards of both IS: 15477 - 2019 and EN 12004, ROC PRIME is classified as a Type-2 adhesive (IS: 15477 - 2019) and a C2T adhesive (EN 12004), distinguishing it as a high-quality solution for various tiling needs.

Variants and Applications

ROCBOND ROC PRIME comes in two distinct variants, designed to cater to specific applications:

1. ROC PRIME White: This variant is specially formulated for delicate tiling tasks involving glass mosaics, natural stones, and composite marble stones. Its unique composition makes it ideal for these materials, ensuring strong adhesion and a perfect finish.

2. ROC PRIME Gray (not specified in input but presumed based on standard practice): Engineered for a broad array of tiling tasks, this variant excels with ceramic tiles, natural stones, pavers, and bricks, making it a versatile choice for both residential and commercial projects.

Both variants are ready to use and are perfect for:

• Tiling in kitchen and bathroom areas
• Tiling in swimming pools and water features
• Cladding and façade applications
• Heavy-duty commercial tiling applications

Special Features

The ROCBOND ROC PRIME Tile Adhesive boasts several standout features:

• High Polymer Modified: This helps in achieving high bonding strength, providing durability to the tiling.
• Thinset Adhesive: Allows for a thinner application, which can save materials and make the surface even.
• Versatility: Suitable for both interior and exterior applications.
• Compliance with Standards: Adheres to IS: 15477 - 2019 and EN 12004, ensuring quality and reliability.

Technical Information

Here are the detailed technical specifications for the ROCBOND ROC PRIME Tile Adhesive:

• Appearance: White Cement Powder
• Pot Life: ≥2 hours
• Pack Size: Available in 20 kg bags
• Open Time: ≥30 minutes
• Bed Thickness: 6-12 mm for general applications, 3-9 mm for finer tasks
• Adjustability: 30 minutes
• Mixing Ratio:
• ROC PRIME White: 6 L to 6.5 L of water per 20 kg bag
• ROC PRIME Gray (presumed): 5.5 L to 6 L of water per 20 kg bag
• Final Setting Time: 24 hours

Advantages of ROCBOND ROC PRIME

• Ease of Use: The product is ready to use, requiring only the appropriate amount of water for mixing, making installation straightforward and hassle-free.
• Extended Open Time: With an open time of ≥30 minutes, the adhesive allows ample time for adjustment, ensuring precise placement and alignment of tiles.
• High Adhesion Strength: The polymer modification upscales the adhesive strength, making it ideal for heavy tiles and stones.
• Fast Setting: Within 24 hours, the adhesive sets completely, speeding up the overall tiling project and reducing downtime.
• Application Range: Suitable for a broad range of surfaces and materials, enhancing its versatility and functionality in diverse tiling applications.

Application Instructions

Surface Preparation

1. Clean the Surface: Ensure the surface is free of any dust, oil, grease, and loose particles.
2. Moisturize: Damp the surface slightly with water before applying the adhesive. This helps prevent the substrate from sucking the water out of the adhesive prematurely.

Mixing Instructions

1. Measure Water Correctly: Use 6 to 6.5 liters of water for mixing with 20 kg of ROC PRIME (white variant) or 5.5 to 6 liters of water for the gray variant.
2. Mixing: Add the measured water into a clean bucket, then gradually add the adhesive powder while constantly stirring to avoid lumps.
3. Mix Until Smooth: Continue mixing till you get a homogeneous and lump-free consistency. Allow the mixture to slake for 5-10 minutes, then re-mix before application.

Application Process

1. Apply the Mortar: Using a notched trowel, spread the adhesive onto the surface at a thickness ranging from 3-12 mm.
2. Fix the Tiles: Lay the tiles into the adhesive bed, pressing them down firmly to ensure full contact with the adhesive.
3. Adjust as Needed: You have up to 30 minutes of adjustability time to make